Questions about bootstraps, HU cards and Tier Wipes. Get answers and dss hu script.

Eeprom Stands for "Electronically Eraseable Programmable Read Only Memory". Not to mention the price is actually quite cheap considering what bootloaders cost before. The design is very similar to the other ones on the market at this time and it also glitchs for a half second or so every half an hour like clockwork like the others i have seen. The BUD systems cost about six times more than the DSS systems. If the IRD determines that the CAM is married to another IRD, it will usually display a message to the effect of "Insert another access card".

The HU cards are backwards compatible so they will work in any generation of DirecTV receivers. Although i only had a few cards to try with it, it did get into all of them on the first glitch. We will test it and post the results. PROGRAMMER = A type of card programming hardware. 07/24/2002 02:22 PM by ChoctawBA Dish EMU Experts Needed! Example IF you post this questions "How do I flash my un-looper?" The EEPROM is another key component on the access card and is usually heavily shielded with electronic barriers to help prevent unauthorized access. This results in loss of programming only and card can still be re-programmed again. You must use your modified un-looper or hu loader to read the cards EPROM and save your bin or image information. Generally, the problem stems from one or more of the key settings in the AVR3 getting corrupted.

Here P4 cards plus private script plus satellite loaders gets you Free TV, no more wipe card.

COM PORT = You should know this already, the serial port that your programmer or unlooper plugs into. Try using it for that purpose sometime, Just make sure that you use a damaged one though. Think of it as your card's fingerprint. In addition, the IRD number is used to "marry" a given CAM (see below) to a specific IRD With our ability to extract HU card ZKTs, it really is not much of a hindrance to emulation with an H card, but the write protect modification should still be performed to prevent DTV from corrupting it in the future making a pile of garbage out of your receiver.

Free information for people who want atmega and NRD313NA Receivers. Download P4 Script.